Language selection

Search


Modelling & Simulation (M&S) and Uncertainly Qualification (UQ) for Safety Analysis of Nuclear Power Plants

Xi’an Jiaotong University, Xi’an, China
April 25–29, 2016

Prepared by:
Wei Shen, Canadian Nuclear Safety Commission

Abstract:

A safety report demonstrates that the design of Nuclear Power Plants (NPPs) meets design and safety requirements through safety analysis by using modelling & simulation (M&S) tools. M&S uncertainties must be accounted for in a safety analysis to ensure a high level of confidence in M&S results. The accepted process for evaluating M&S tools is based on the general concept of verification and validation (V&V). As a key ingredient of V&V, uncertainly qualification (UQ) has always been an important endeavour for both regulators and licensees. This lecture presents an extensive overview of M&S and UQ for NPP safety analysis. The lecture not only describes UQ fundamentals but also demonstrates UQ through a case study for CANDU reactors. The lecture is designed for students and beginners, but is also beneficial to experienced professionals.

To obtain a copy of the abstract’s document, please contact us at cnsc.info.ccsn@cnsc-ccsn.gc.ca or call 613.995.5894 or 1.800.668.5284 (in Canada). When contacting us, please provide the title and date of the abstract.

Page details

Date modified: