2018 International Severe Accident Management Conference
Ottawa, Ontario, Canada
October 15–18, 2018
Hosted by the Canadian Nuclear Safety Commission (CNSC) and the Canadian Nuclear Laboratories (CNL), the 2018 International Severe Accident Management Conference aims to bring together international experts in the field of severe accident management (SAM), in order to exchange current practices and challenges in SAM implementation. The conference will focus on recent advances made in the understanding, development, implementation and verification of SAM.
The conference will result in a summarized report documenting major best international practices, which will be disseminated to the Nuclear Energy Agency (NEA) Committee on the Safety of Nuclear Installations (CSNI).
Presentations on current practices and challenges in SAM implementation are currently being solicited. Several presentations followed by discussion will be planned according to the suggested topics below. The preliminary schedule for the conference is as follows:
- Day 1: Post-Fukushima enhancements of the SAM requirements, principles, strategies and procedures.
- Day 2: Equipment for accident management.
- Day 3: Human factors considerations under accident conditions.
- Day 4: Use of Research and Development (R&D) results in strengthening accident management effectiveness. This day will also be used to provide an overall summary of the conference and discuss the way forward on the above topics.
More details on these topics follow in the next section.
Since the Fukushima Daiichi accident, SAM practices have been developed substantially. Sharing information on these developments will benefit a wide spectrum of participants, including nuclear power plant personnel, developers of SAM guidelines, researchers in severe accident phenomenology, regulators and other experts.
This conference will promote sharing of the best practices in the development, implementation and verification of severe accident management. It will also foster international harmonization of approaches and understanding of the national specifics in SAM implementation, and enable identification of the current trends and potential challenges for future work.
Each theme of the conference will be addressed in one day. It begins with a plenary session and followed-up by three parallel sessions. The conference topics are organized as follows:
- Day 1: Post-Fukushima enhancements of SAM requirements, principles, strategies and procedures, including:
- SAM development, implementation, update and maintenance
- techniques used to evaluate SAM effectiveness (with consideration to Design Extension Conditions (DEC), multi-units aspects of SAM and spent fuel bays)
- long-term impact and recovery considerations
- Day 2: Equipment for accident management, including:
- use of, and requirements for, portable equipment and fixed dedicated equipment (i.e. emergency mitigating equipment (EME) and flex)
- equipment operability in severe accident conditions (i.e. containment filter venting system (CFVS), passive autocatalytic recombiners (PARS), hydrogen risks and instrumentation needs)
- application of DEC to SAM (i.e. design, assessment and survivability)
- Day 3: Human factors considerations under accident conditions, including:
- human performance under accident conditions
- organizational capabilities to manage the unexpected
- interfaces between accident management and emergency preparedness
- Day 4: Plenary session on the use of R&D results in strengthening accident management effectiveness and conference closure.
Call for presentations
Participants wishing to present are required to submit an abstract (200 to 400 words). All abstracts should be submitted by
May 1, 2018. (Note: All abstracts and extended summaries submitted by email must be in MS Word, in "Times New Roman 11" font.)
Presenters should submit, by email, their extended summary and presentation by September 3, 2018 for program development. Presentations are not to exceed 25 minutes, and will be followed by 5 minutes of questions.
Copyright transfer forms will be provided and will need to be submitted with the final presentation.
Location and accommodations:
ISAMC-2018 will be held in Canada's capital, Ottawa, Ontario.
Ottawa Old City Hall
111 Sussex Drive
To learn more about where to stay and what to do while in Ottawa, visit:
Language of the seminar and proceedings material
All presentations and discussions will be in English. A USB containing all presentations will be compiled and distributed at the end of the conference. Presentations may be published on the CNSC's website.
Key dates at a glance
- Presentation abstracts due by: May 1, 2018
- Last day for participation registration: June 1, 2018
- Extended summary and presentations due by: September 3, 2018
- Conference program emailed to participants by: September 28, 2018
- Conference: October 15–18, 2018
Registration and participation
Participation is open to experts from regulatory authorities and their technical support organizations; universities; research organizations; nuclear power plant owners, operators, designers and vendors; and industry associations.
Advanced registration is required, as seats will be limited. There is no fee to participate. Travel and accommodation costs are the responsibility of participants. Registration must be completed by June 1, 2018.
Please read the Privacy Statement before completing the form below. All fields marked with an asterisk (*) are required. If you have difficulty with the form below, contact us at the coordinates below.
The number of participants who can be accommodated is limited and therefore the conference organizers may restrict participation.
For assistance with administrative details or for further information, please contact:
Canadian Nuclear Safety Commission
280 Slater Street
P.O. Box 1046, Station B
Ottawa, ON K1P 5S9
Telephone: +1 613 995-3946
- Date modified: